Golana

• OSC 1's CTRL 1 and CTRL 2 say what they do: their names change with the WAVE (SAW: OCTAVE, OCT LFO; PULSE: WIDTH, PWM; TRI: FOLD, FOLD LFO; SINE: X-MOD, XMOD LFO), PULSE's WIDTH shows its duty in %, the drawing shows faintly how far CTRL 2 (LFO 1) moves the wave, and the page's fourth card is LFO 1's rate.
• HOME's scope, quicker and with a trail: redrawn every frame with lines only, as Felucca's. A new view, TRAIL (the default): the wave now, the last ones behind it in the palette's second colour (NIGHT: orange and green), about 30 ms of sound (two or three cycles of a bass). ORBIT and RIDGE leave a trail too; TRAIL takes RING's place.
• New waves: OSC 1's MORPH (CTRL 1 from the saw to the square), OSC 2's MIX (a saw and a square at once), and four new SUB types: -1 SAW, -2 SAW, -1 MIX, -2 MIX.
• Cleaner oscillators: the wavefolders (FOLD, TRI's fold) without most of their aliasing (ADAA), SINE's cross modulation a little shallower high up (in tune, no whistling), and every note starts its oscillators from its own point of the wave, as an analog synth's (the attacks a little alive, no longer all alike).
• Mod wheel (MIDI CC1): a vibrato on its own, or, routed in the PATCH, the sources MODW, MW*LFO1, MW*LFO2 (an LFO as deep as the wheel) and AFTER (aftertouch).
• SCALE LOCK (SCL › SCALE): every key and MIDI note in the scale you choose (16 scales, any key).
• CHORD (SCL › CHORD): a key or a MIDI note plays a chord: the scale's own triad or seventh, or a fixed shape (MAJ, MIN, DOM7, MAJ7, MIN7, SUS4, POW), in five voicings.
• SUPERSAW, a new factory sound in program 25 (a program you wrote there stays).

Install it from the browser: https://gadlele.github.io/Golana/install/

• SUB oscillator (EDIT › SUB/DRIFT): a square or a sine one or two octaves below OSC 1, in step with it, with its own level into the mixer. Deep basses without giving up OSC 2.
• DRIFT (EDIT › SUB/DRIFT): analog age. Each note's two oscillators a little out of tune, each its own way, slowly wandering, and its filter a little off: from a touch of life to a worn-out machine.
• Eight new factory sounds in programs 17-24, made with them: SUB BASS, REESE, POLY CHORUS, OLD STRINGS, WORN TAPE, DRIFT LEAD, SUB ARP, AGED PAD. A program you wrote in 17-24 stays as it is.
• Programs saved with 1.0 and 1.1 load exactly as before (SUB and DRIFT off).

Install it from the browser: https://gadlele.github.io/Golana/install/

• Four new arpeggiator types (SEQ › ARP › TYPE), after the six of 1.0, which play as before:
  • ORDER: the notes in the order you pressed them.
  • CONVERGE: from the outside in, the lowest, the highest, the second lowest, the second highest…
  • PEDAL: the lowest note between each of the others, as a pedal (C E C G C C′…).
  • DOUBLE: each note twice, then its octave twice (C C C′ C′, E E E′ E′, G G G′ G′).

Install it from the browser: https://gadlele.github.io/Golana/install/

The first release. Golana is Felucca 1.5.1 turned into one analog-style synth, laid out like the classic microKORG:

• Two oscillators: OSC 1 SAW, PULSE, TRI (wavefold) or SINE (cross modulation); OSC 2 SAW, SQR or TRI with RING and SYNC; noise and a wavefolder in the mixer.
• Five filters: LPF24, LPF12, BPF, HPF and MS20, with key tracking and its own envelope.
• FILTER EG, AMP EG, two LFOs with key and tempo sync, and four patch cords.
• POLY, MONO, LEGATO, UNISON (eight detuned oscillators), detune, portamento, spread.
• Arpeggiator and a 16-step sequencer saved with each program.
• Effects: MOD FX (chorus, flanger, ensemble, phaser, METAL), delay and reverb in three orders.
• 32 programs, 16 factory sounds; MIDI Program Change; CC74 and CC71 move cutoff and resonance.
• Pages that draw the sound; four palettes; a three-second power-on with the eighties' stripes.
• USB rescue: OCT− held at power-on, or after two failed starts.

Install it from the browser: https://gadlele.github.io/Golana/install/