ProSign inJoin
Mod

digineighbor

Hype19/100

Neighbor Machine for the Digitakt Mk1

digineighbor is a mod for the Elektron Digitakt, by @irpina. Open source under GPL-2.0, latest release v0.6 (October 2026), 11 stars on GitHub.

forElektron Digitakt·by@irpina

Unclaimed. Is this yours? Sign in with GitHub as @irpina to claim it.

Downloads
0
Stars
11
Forks
0
Commits
4
Last commit
Download v0.6

digineighbor-0.6-os1.54.elemod· 19 KB· +3 files

GPL-2.0· irpina/digineighbor·downloads come from the creator’s GitHub releases

4
Commits
1
Releases
4 commits and 1 release in the last year
Activity · last 12 months
1 releases
  1. v0.6digineighbor 0.6Latest4 files

    A NEIGHBOR machine for the Digitakt mk1 (OS 1.53 and 1.54), like the Octatrack's neighbor machine: a track set to NEIGHBOR plays another track's audio through its own overdrive, filter, envelope, volume, pan and sends.

    The SRC page: TUNE (a pitch shifter, -24 to +24 semitones, that follows the trig's note), BR, SLOT (the source track, 1-8), GAIN (0 to +31.5 dB after the track's own chain) and LEV.

    What's new in 0.6

    • NEIGHBOR comes through core 2.1's machine slots, which several mods can share. It installs alongside digislicer 2.0: the machine menu lists NEIGHBOR after SLICE, then DIGISLICER.
    • Kits keep NEIGHBOR. Up to 0.5, a project or kit loaded back turned NEIGHBOR tracks into ONESHOT, because the Digitakt loads machines it doesn't know as ONESHOT. Core 2.1 keeps them.
    • Otherwise NEIGHBOR works as in 0.5: the same page, routing, TUNE, GAIN and LEV.
    • OS 1.54: the same mod for Digitakt OS 1.54, digineighbor-0.6-os1.54.elemod, with core-2.1-os1.54.elemod; it needs elekloader 0.4.0. In the emulator, core + digineighbor against stock 1.54 passes with every screen identical, and with digihealth and digislicer, the machine menu through to NEIGHBOR's page is identical to 1.53's. That emulator had no samples, so the routing, TUNE and GAIN have not run on 1.54.

    A prototype. The routing has run on a unit. TUNE, GAIN, LEV and the page (0.4 and 0.5), and the machine slots (0.6), have so far only been checked in the emulator (see the README).

    Install

    digineighbor 0.6 needs core 2.1. core-2.1.elemod (OS 1.53) and core-2.1-os1.54.elemod (OS 1.54) are elekloader 0.4.0's, built from its mods/core. The Windows and macOS apps bundle both from 0.4.0 on. From source, install the core for your OS with the mod.

    Build your OS with elekloader 0.4.0 or later, from the stock OS file your unit runs: install digineighbor-0.6.elemod for Digitakt_OS1.53.syx, or digineighbor-0.6-os1.54.elemod for Digitakt_OS1.54.syx, and tick it. The README has the steps. It links with digislicer 2.1 and digihealth too.

    filesha256
    digineighbor-0.6.elemod380837f86c05cf6d0aba2dfc930a4309cc6b2e99b2e8c6a450f0abe6e844dccd
    digineighbor-0.6-os1.54.elemod664cb3286b1f7b18ee757ce67c3d38d878741f8ebf6920da21d1eb576a6aeec0
    core-2.1.elemodf38b0c193677a060b3fdb28fe71b9332be8a5e7d36ecaf91a3c86a61bab558eb
    core-2.1-os1.54.elemod8c1fe78ccd1427d6a93f181eaad9f064efb65cf6dd683192dbcc33e83dc548b9

    Custom firmware is at your own risk. Not affiliated with Elektron.