Sign inJoin
Firmware

Carnac OS

Hype: hot · 83

Alternative operating firmware for the FM-1.

forM-VAVE FM-1·by@OwenKirby

Unclaimed. Is this yours? Sign in with GitHub as @OwenKirby to claim it.

Download v0.9.6

carnac-0.9.6.fwsc· 595 KB· +1 file

GPL-3.0· OwenKirby/carnac-os·downloads come from the creator’s GitHub releases

29 commits and 4 releases in the last year
4 releases
  1. v0.9.6Carnac OS v0.9.6Latest2 files

    Carnac OS 0.9.6

    • Wave check at power-on: if the PCM waves or the FOUNDATIONS bank are missing (for example after installing the .fwsc alone with another tool), the start-up screen shows the field with no standing stones and WAVES MISSING; if they come from another version, WAVES OUT OF DATE. The web installer, or pcm_store_upload.py sync, fixes it.
    • Everything else is as in 0.9.5: patches, performances and settings carry over unchanged.

    Install with the web installer: it writes the firmware and then the waves.

    The .fwsc holds the firmware only. The PCM waves and the FOUNDATIONS bank live in their own flash areas, so if you install the .fwsc with fm1_install.py or any other tool, also run the web installer once, or python src/hardware/pcm_store_upload.py sync from a checkout of this tag.

  2. v0.9.5Carnac OS v0.9.52 files

    Carnac OS 0.9.5

    • Factory bank SAMHAIN: 32 patches + 9 performances (SAMHAIN, DUB OFFERING reworked)
    • Foundations wavetable bank (bank 0), PCM wave rework (MOONSONG, CAIRN SPIRIT)
    • New archs: FULL and DUAL SPREAD; SPREAD shown as SINGLE
    • Bigger, readable menus: 4 rows at 2x on every page, 3 on the ARP page; bigger knob dials
    • PERF page: L1/L2 PATCH, SEQ/ARP LINK and PERF PRESET load as you turn; GLOBAL rows MIDI first
    • Patch format v10 (cutoff mod 0..127, VEL > LEVEL ENV1-3, LFO DEPTH MOD); older patches migrate

    Install with the web installer: it writes the firmware and then the waves.

    The .fwsc holds the firmware only. The PCM waves and the FOUNDATIONS bank live in their own flash areas, so if you install the .fwsc with fm1_install.py or any other tool, also run the web installer once, or python src/hardware/pcm_store_upload.py sync from a checkout of this tag. Without that, FOUNDATIONS plays a sine and the PCM waves are silent.

  3. v0.9.4Carnac OS v0.9.4Beta2 files

    Install from the web: https://owenkirby.github.io/carnac-os/install/ (Chrome or Edge), or download carnac-0.9.4.fwsc below.

    New in 0.9.4

    • AMP DRIVE reworked: new TUBE and OVERDRIVE models, smoother SOFT/HARD/FOLD/TAPE curves, much more gain, and the level holds roughly even as DRIVE turns.
    • Sequence and arp names: name them on the SAVE page like patches and performances.
    • GLOBAL settings survive power-off: MIDI channels, CUSTOM CC1/CC2, BEND RANGE and CLOCK SOURCE no longer reset when a performance loads.
    • Tight MIDI: incoming notes and clock (USB or TRS) play at a steady 23 ms delay, and the clock locks to an external tempo.
    • Shared noise: one noise source for all voices, as on classic polysynths. Noisy patches use much less CPU.
    • MONO layers in DUAL/SPLIT take one voice and the other layer gets the rest (1 + 7). In SPLIT, layer 2 has its own VOICE MODE.
    • ARP step peek: hold a step key to see that step's values on the knobs.
    • DELAY SYNC divisions now run short to long across DELAY TIME. BINAURAL BEAT HZ is finer (0–15.9 Hz in 1/8 Hz steps).

    Upgrading from 0.9.3

    Patches, performances, sequences, arps and settings all carry over. A performance you saved with DELAY SYNC on may land on a different division, so set its DELAY TIME again. Driven patches sound different and can be up to 5 dB quieter.

    SHA-256 7ef06985cb9565d4ed5bc93445c07401ca6278e21b9032ab0491fa1bd6c1c02f

  4. v0.9.3Carnac OS v.0.9.32 files

    Full Changelog: https://github.com/OwenKirby/carnac-os/compare/v0.9.2...v0.9.3